GERÄTE ÜBERSICHT

thingsHub integrierte Asset Tracker und IoT Sensoren

Beschreibung

Impuls Adapter (3 Eingänge) “Pulse Sens’O” LoRaWAN

Impulszähler für die Fernauslese von Gas-, Wasser-, Energie- oder
Wärmezählern mit Impulsausgang. Bis zu 3 Geräte pro Sensor anschließbar.
Konfigurierbare Übertragung (Intervall, Schwellenwerten & Batchreport)

Details:

3 Pulse-Eingänge, 0-30V
Lithium-Batterie 3.6V, 3,6Ah
Batterielaufzeit bis zu 12 Jahren
Schutzart: IP55; optional Outdoor IP68 und/oder AteX Zone 2
Größe 85x82x55mm

RF TRANSCEIVER	Frequency (MHz) EU: 863-870 Transmit Power (dBm) +14 Receiver Sensitivity (dBm) -140
FIRMWARE	Protocol: LoRaWAN, Class A Transmission cycles: 10mn, 1h, 12h or defined by network Data history available Activation method: Activation by Personalization (ABP) Over-The-Air Activation (OTAA) Data encryption: AES128
SENSOR INPUT	Number of inputs: 3 Impedance (M?): >1 Capacitance (nF): 1; typical Voltage (V): 0 – 30 Current (µA): 3.5 Frequency (Hz): 1-100
POWER	Power supply: 3,6V / 3600mAh lithium battery ATEX certified (optional) Autonomy within a +10°C to +25°C temperature range: 12 years for 1 measurement & 1 transmission per day
INTERFACE	LED Indicator: 3 LEDs for Configuration, Network pairing & Activity on inputs Magnetic Switch: Reset, ON/OFF Cable connection: IP55: cable connected inside the box. IP68: 1,5m cable length (The free end of the cable must be connected in an area that is protected from moisture)
MECHANICAL FEATURES	Dimension (mm): 84x82x85 IP Class: IP55 or IP68 available
ENVIRONMENTAL	Operating temperature (°C): -20 / +50 Storage temperature (°C): -10 / +30
DIRECTIVES & STANDARD	EN, 61000-4-2 EN 300-220-1 V2-4-1, EN 301 489 V1-6-1 CE and RoHS recommendation compliant