Impuls Adapter “S0 Pulse Sensor”

This product is used in the following IoT solutions:

Description

Pulse meter for remote reading pulse signals (gas, water, energy or heat meters with pulse output etc.).

Details:

  • 1 pulse input, 0-30V
  • Lithium battery 3.6V, 1,2 Ah
  • Battery life up to 5 years
  • Protection class: IP55 & AteX Zone 2
  • Dimensions: 85x82x55mm
RF TRANSCEIVER
  • Frequency (MHz) EU: 863-870
  • Transmit Power (dBm) +14
  • Receiver Sensitivity (dBm) -140
FIRMWARE
  • Protocol: LoRaWAN, Class A
  • Transmission cycles: 10mn, 1h, 12h or defined by network
  • Data history available
  • Activation method:
    • Activation by Personalization (ABP)
    • Over-The-Air Activation (OTAA)
  • Data encryption: AES128
SENSOR INPUT
  • Number of inputs: 1
  • Impedance (M?): >1
  • Capacitance (nF): 1; typical
  • Voltage (V): 0 – 75
  • Current (µA): 3.5
  • Frequency (Hz): 1-100
  • Anti-bounce: from 0 to 1 minute in 125ms increments
POWER
  • Power supply: 3,6V / 1200mAh lithium battery (AtEx Zone II compliant)
  • Autonomy within a +10°C to +25°C temperature range: > 3 years for 1 transmission per day
INTERFACE
  • LED Indicator: 2 LEDs for Configuration, Network pairing
  • Switch: Reset, ON/OFF
MECHANICAL FEATURES  Dimension (mm): 75x70x21
ENVIRONMENTAL
  • Operating temperature (°C): -20 / +40
  • Storage temperature (°C): 0 / +30 
DIRECTIVES & STANDARD EN, 61000-4-2 EN 300-220-1 V2-4-1, EN 301 489 V1-6-1 CE and RoHS recommendation compliant

Additional information

Weight 0.1 kg
Device Type

Adapter & Retrofit

Connectivity

LoRaWAN

Impuls Adapter “S0 Pulse Sensor”