The caltos E heat cost allocator sends the current consumption value, historical consumption... more
The caltos E heat cost allocator sends the current consumption value, historical consumption values and various device parameters every 180 seconds. The caltos E heat cost allocator fully meets the high demands of the housing industry in submetering as well as the constantly increasing comfort requirements of apartment owners and tenants with its wide range of possible applications and its convenient recording and data transmission technology (LoRaWAN®, wireless M-Bus according to OMS). The heat cost allocator caltos E has a particularly wide temperature application range of 35 °C to 130 °C and is optimally suited for heating systems of all design temperatures (especially low-temperature systems). The caltos E is used in single-pipe heating systems as well as in today's standard two-pipe systems. The heat cost allocator caltos E works according to the two-sensor measuring principle, in which high-precision sensors continuously record the actual temperature difference between the radiator and the room temperature. The measured data are reliably stored and evaluated for recording consumption. In addition, in the event of thermal influences (e.g. manipulation or heat accumulation) there is an automatic switchover from the two-sensor measuring principle to the single-sensor measuring principle. Plausibility checks of the measured room air and radiator temperatures in the unit differentiate between heating operation and external heating already during the heat-up phase. Translated with www.DeepL.com/Translator (free version)
|Device Type:||Sensor Plug'n'Play|
|Application:||Energy measurement, Remote meter reading|
|Industry:||Buildings & Facilities, Public & Private Utilities, Smart City, Smart Retail|
Related links to "Electronic Heat Cost Allocator HKVE ZRC caltos E SPLITT LORA MV"